Request a Quote on Sps Technologies Inc Part Number 129968A-4-D21 with the NSN 5305-01-323-4155 Today

Part Number: 129968A-4-D21

Alternate P/N: 129968A4D21

Manufacturer: Sps Technologies Inc

NSN: 5305-01-323-4155

NIIN: 013234155

Item Name : Screw Close Tolerance

CAGE Code: 80539

FSC: 5305 Screws

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Buy Mil Spares is your sourcing solution for top-quality military and defense parts, aerospace parts, and other similar products that are necessary for operational fulfillment. You have reached the RFQ page for part number 129968A-4-D21, a Screw Close Tolerance item that is listed with the NSN 5305-01-323-4155 for an ease of identification. Manufactured by Sps Technologies Inc and readily available for procurement today, you are always welcome to request a quote on this NSN part to receive tailored pricing information and fulfillment options from our team. Simply offer us important information like your desired quantity, price, and fulfillment timeframe, and our team will supply you with a tailored quote on part number 129968A-4-D21 in 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that customers quickly identify and procure exact items, we list everything with as much relevant information as possible. For example, while part number 129968A-4-D21 is manufactured by Sps Technologies Inc, it is specifically done so under CAGE Code 80539, a unique identifier assigned to a specific facility by the DLA that supplies to various government or defense agencies. Furthermore, using the first digits of the NSN 5305-01-323-4155, one can also determine that this part falls under FSC 5305 Screws. With this in mind, continue exploring our website today, and see how we can help you secure competitive pricing and rapid lead times on all desired NSN parts.

NSN Information for Part Number 129968A-4-D21 with NSN 5305-01-323-4155, 5305013234155

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-323-4155 Item Description: Screw Close Tolerance	5305	013234155	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
129968a-4-D21		2	5

Characteristics Data of NSN 5305-01-323-4155, 5305013234155

MRC	Criteria	Characteristic
AASA	THREAD LENGTH	0.403 INCHES NOMINAL
AASB	FASTENER LENGTH	1.690 INCHES MINIMUM AND 1.720 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.3504 INCHES MINIMUM AND 0.3988 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.564 INCHES MINIMUM FIRST HOLE AND 1.614 INCHES MAXIMUM FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.403 INCHES NOMINAL
AASB	FASTENER LENGTH	1.690 INCHES MINIMUM AND 1.720 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.3504 INCHES MINIMUM AND 0.3988 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.564 INCHES MINIMUM FIRST HOLE AND 1.614 INCHES MAXIMUM FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.403 INCHES NOMINAL
AASB	FASTENER LENGTH	1.690 INCHES MINIMUM AND 1.720 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.3504 INCHES MINIMUM AND 0.3988 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.564 INCHES MINIMUM FIRST HOLE AND 1.614 INCHES MAXIMUM FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.403 INCHES NOMINAL
AASB	FASTENER LENGTH	1.690 INCHES MINIMUM AND 1.720 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.3504 INCHES MINIMUM AND 0.3988 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.564 INCHES MINIMUM FIRST HOLE AND 1.614 INCHES MAXIMUM FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND