INSTANT RFQ

Request a Quote on Honeywell International Inc Part Number 805101-2-1 with the NSN 5905-00-018-8820 Today

Part Number: 805101-2-1
Alternate P/N: 80510121
NIIN: 000188820
CAGE Code: 70210
FSG: 59 Electrical and Electronic Equipment Components
Country: USA
NCB Code: 00

Buy Mil Spares is your sourcing solution for top-quality military and defense parts, aerospace parts, and other similar products that are necessary for operational fulfillment. You have reached the RFQ page for part number 805101-2-1, a Resistor Variable Wire Wound Pre item that is listed with the NSN 5905-00-018-8820 for an ease of identification. Manufactured by Honeywell International Inc and readily available for procurement today, you are always welcome to request a quote on this NSN part to receive tailored pricing information and fulfillment options from our team. Simply offer us important information like your desired quantity, price, and fulfillment timeframe, and our team will supply you with a tailored quote on part number 805101-2-1 in 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

To ensure that customers quickly identify and procure exact items, we list everything with as much relevant information as possible. For example, while part number 805101-2-1 is manufactured by Honeywell International Inc, it is specifically done so under CAGE Code 70210, a unique identifier assigned to a specific facility by the DLA that supplies to various government or defense agencies. Furthermore, using the first digits of the NSN 5905-00-018-8820, one can also determine that this part falls under FSC 5905 Resistors. With this in mind, continue exploring our website today, and see how we can help you secure competitive pricing and rapid lead times on all desired NSN parts.

NSN Information for Part Number 805101-2-1 with NSN 5905-00-018-8820, 5905000188820

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-018-8820

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050001888200NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
302-5006225

Characteristics Data of NSN 5905-00-018-8820, 5905000188820

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY6
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER1.87400 INCHES MINIMUM AND 1.87500 INCHES MAXIMUM
AAVMPILOT LENGTH0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER1.875 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0.06000 INCHES MINIMUM
ABPMBODY DIAMETER1.995 INCHES MINIMUM AND 2.005 NOMINAL CENTIMETERS
ABWVSHAFT DIAMETER0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM
ABXFSHAFT LENGTH0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM
ADAQBODY LENGTH3.630 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER1.99500 INCHES MINIMUM AND 2.00500 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0.08800 NOMINAL MILS AND 0.09800 INCHES MAXIMUM
AEDXSHAFT STYLEROUND
AEDZSHAFT BEARING TYPEBALL
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE4.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE4.00 INCH-OUNCES
AEFYSHAFT END PLAY0.001 INCHES
AEFZSHAFT RUNOUT0.002 INCHES
AEGALATERAL RUNOUT0.001 INCHES
AEGBPILOT DIAMETER RUNOUT0.001 INCHES
AEGCSHAFT RADIAL PLAY0.0008 INCHES
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS 1ST SECTION AND 5.0 KILOHMS 2ND SECTION AND 10.0 PERCENT,RATED AMPERES C AND BETTER SELECT AND 5.0 KILOHMS 4TH SECTION AND 5.0 KILOHMS 5TH SECTION AND 10.0 KILOHMS 6TH SECTION
CQCHTAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION175.0 6TH SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG350.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.04 TO 0.04 1ST SECTION AND-0.10 TO 0.10 2ND SECTION AND-0.10 TO 0.10 3RD SECTION AND-0.10 TO 0.10 4TH SECTION AND-0.10 TO 0.10 5TH SECTION AND-0.10 TO 0.10 6TH SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR ALL SECTIONS
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
CRJSFIXED TAP QUANTITY PER SECTION1 6TH SECTION
CRKSTAP LOCATION TOLERANCE PER SECTION-2.0 TO 2.0 DEG ANGULAR ROTATION 6TH SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 1ST SECTION AND-5.0 TO 5.0 2ND SECTION AND-10.0 TO 10.0 3RD SECTION AND-5.0 TO 5.0 4TH SECTION AND-5.0 TO 5.0 5TH SECTION AND-5.0 TO 5.0 6TH SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS TABLE
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER125.0 ALL SECTIONS
TESTTEST DATA DOCUMENT70210-805101 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY19 TURRET

Related NSN Components of 805101 2 1

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top