Request a Quote on Honeywell International Inc Part Number 364495-2 with the NSN 5310-01-317-1805 Today

Part Number: 364495-2

Alternate P/N: 3644952

Manufacturer: Honeywell International Inc

NSN: 5310-01-317-1805

NIIN: 013171805

Item Name : Nut Plain Hexagon

CAGE Code: 99193

FSC: 5310 Nuts and Washers

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Buy Mil Spares is your sourcing solution for top-quality military and defense parts, aerospace parts, and other similar products that are necessary for operational fulfillment. You have reached the RFQ page for part number 364495-2, a Nut Plain Hexagon item that is listed with the NSN 5310-01-317-1805 for an ease of identification. Manufactured by Honeywell International Inc and readily available for procurement today, you are always welcome to request a quote on this NSN part to receive tailored pricing information and fulfillment options from our team. Simply offer us important information like your desired quantity, price, and fulfillment timeframe, and our team will supply you with a tailored quote on part number 364495-2 in 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that customers quickly identify and procure exact items, we list everything with as much relevant information as possible. For example, while part number 364495-2 is manufactured by Honeywell International Inc, it is specifically done so under CAGE Code 99193, a unique identifier assigned to a specific facility by the DLA that supplies to various government or defense agencies. Furthermore, using the first digits of the NSN 5310-01-317-1805, one can also determine that this part falls under FSC 5310 Nuts and Washers. With this in mind, continue exploring our website today, and see how we can help you secure competitive pricing and rapid lead times on all desired NSN parts.

NSN Information for Part Number 364495-2 with NSN 5310-01-317-1805, 5310013171805

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-317-1805 Item Description: Nut Plain Hexagon	5310	013171805	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
364495-2		2	3

Characteristics Data of NSN 5310-01-317-1805, 5310013171805

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
ACTA	NUT STYLE	HEXAGON
ADEA	NUT HEIGHT	0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
AGGP	DRILLED HOLE DIAMETER	0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
ALET	HOLE TYPE AND QUANTITY	6 DRILLED
ASDB	WIDTH ACROSS FLATS	1.000 INCHES NOMINAL
BZRR	THREAD SERIES	UNF
CMLP	THREAD QUANTITY PER INCH	18
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
CQJX	NOMINAL THREAD SIZE	0.562 INCHES
CRHC	HOLE CONFIGURATION STYLE	CONFIGURATION A
CRSQ	COUNTERSINK ANGLE	118.0 DEGREES MINIMUM BOTH ENDS AND 122.0 DEGREES MAXIMUM BOTH ENDS
CRTM	BEARING SURFACE TYPE	WASHER FACED
MATT	MATERIAL	STEEL COMP E4340 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	OXIDE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
ACTA	NUT STYLE	HEXAGON
ADEA	NUT HEIGHT	0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
AGGP	DRILLED HOLE DIAMETER	0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
ALET	HOLE TYPE AND QUANTITY	6 DRILLED
ASDB	WIDTH ACROSS FLATS	1.000 INCHES NOMINAL
BZRR	THREAD SERIES	UNF
CMLP	THREAD QUANTITY PER INCH	18
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
CQJX	NOMINAL THREAD SIZE	0.562 INCHES
CRHC	HOLE CONFIGURATION STYLE	CONFIGURATION A
CRSQ	COUNTERSINK ANGLE	118.0 DEGREES MINIMUM BOTH ENDS AND 122.0 DEGREES MAXIMUM BOTH ENDS
CRTM	BEARING SURFACE TYPE	WASHER FACED
MATT	MATERIAL	STEEL COMP E4340 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	OXIDE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
ACTA	NUT STYLE	HEXAGON
ADEA	NUT HEIGHT	0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
AGGP	DRILLED HOLE DIAMETER	0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
ALET	HOLE TYPE AND QUANTITY	6 DRILLED
ASDB	WIDTH ACROSS FLATS	1.000 INCHES NOMINAL
BZRR	THREAD SERIES	UNF
CMLP	THREAD QUANTITY PER INCH	18
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
CQJX	NOMINAL THREAD SIZE	0.562 INCHES
CRHC	HOLE CONFIGURATION STYLE	CONFIGURATION A
CRSQ	COUNTERSINK ANGLE	118.0 DEGREES MINIMUM BOTH ENDS AND 122.0 DEGREES MAXIMUM BOTH ENDS
CRTM	BEARING SURFACE TYPE	WASHER FACED
MATT	MATERIAL	STEEL COMP E4340 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	OXIDE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
ACTA	NUT STYLE	HEXAGON
ADEA	NUT HEIGHT	0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
AGGP	DRILLED HOLE DIAMETER	0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
ALET	HOLE TYPE AND QUANTITY	6 DRILLED
ASDB	WIDTH ACROSS FLATS	1.000 INCHES NOMINAL
BZRR	THREAD SERIES	UNF
CMLP	THREAD QUANTITY PER INCH	18
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
CQJX	NOMINAL THREAD SIZE	0.562 INCHES
CRHC	HOLE CONFIGURATION STYLE	CONFIGURATION A
CRSQ	COUNTERSINK ANGLE	118.0 DEGREES MINIMUM BOTH ENDS AND 122.0 DEGREES MAXIMUM BOTH ENDS
CRTM	BEARING SURFACE TYPE	WASHER FACED
MATT	MATERIAL	STEEL COMP E4340 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	OXIDE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL