Request a Quote on Drs Training And Control Systems Llc Part Number 95170061 with the NSN 5340-01-503-2080 Today

Part Number: 95170061

Manufacturer: Drs Training And Control Systems Llc

NSN: 5340-01-503-2080

NIIN: 015032080

Item Name : Brace Corner

CAGE Code: 12339

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Buy Mil Spares is your sourcing solution for top-quality military and defense parts, aerospace parts, and other similar products that are necessary for operational fulfillment. You have reached the RFQ page for part number 95170061, a Brace Corner item that is listed with the NSN 5340-01-503-2080 for an ease of identification. Manufactured by Drs Training And Control Systems Llc and readily available for procurement today, you are always welcome to request a quote on this NSN part to receive tailored pricing information and fulfillment options from our team. Simply offer us important information like your desired quantity, price, and fulfillment timeframe, and our team will supply you with a tailored quote on part number 95170061 in 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that customers quickly identify and procure exact items, we list everything with as much relevant information as possible. For example, while part number 95170061 is manufactured by Drs Training And Control Systems Llc, it is specifically done so under CAGE Code 12339, a unique identifier assigned to a specific facility by the DLA that supplies to various government or defense agencies. Furthermore, using the first digits of the NSN 5340-01-503-2080, one can also determine that this part falls under FSC 5340 Hardware Commercial. With this in mind, continue exploring our website today, and see how we can help you secure competitive pricing and rapid lead times on all desired NSN parts.

NSN Information for Part Number 95170061 with NSN 5340-01-503-2080, 5340015032080

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-503-2080 Item PartTypeName: BRACE,CORNER	5340	015032080	0	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
95170061	6	2	3

Characteristics Data of NSN 5340-01-503-2080, 5340015032080

MRC	Criteria	Characteristic
ABPX	MATERIAL THICKNESS	0.375 INCHES NOMINAL
ABTB	MOUNTING HOLE DIAMETER	0.164 INCHES NOMINAL
ACHY	MOUNTING HOLE TYPE	COUNTERBORED
ADLK	FIRST LEG LENGTH	2.125 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	2.680 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	AIR COMBAT MANEUVERING INSTRUMENTATION (ACMI); P4RC
AHLF	SECOND LEG WIDTH	2.680 INCHES NOMINAL
AHLH	SECOND LEG END WIDTH	0.250 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.164 INCHES NOMINAL
AHLN	SECOND LEG HOLE DIAMETER	0.164 INCHES NOMINAL
AHLT	SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH	0.180 INCHES NOMINAL
AHLU	SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH	0.500 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	1.000 INCHES NOMINAL
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.188 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	2.125 INCHES NOMINAL
AHQQ	FIRST LEG END WIDTH	0.250 INCHES NOMINAL
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	1.343 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.532 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.188 INCHES NOMINAL
AJZU	FIRST LEG STYLE	ANGLE
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
AKBU	SECOND LEG STYLE	ANGLE
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	THREE HOLES
ASXK	HOLE QUANTITY	5
CRMK	ANGLE	90.0 DEGREES NOMINAL
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	GUSSET
FEAT	SPECIAL FEATURES	MOUNTING HOLES ARE 0.164-32UNC-2B COUNTERBORED 0.250
MATT	MATERIAL	ALUMINUM ALLOY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	TRIANGLE
ZZZK	SPECIFICATION/STANDARD DATA	81348-QQ-A-250/11 GOVERNMENT SPECIFICATION
ZZZT	NONDEFINITIVE SPEC/STD DATA	6061 ALLOY AND 651 TREATMENT
ABPX	MATERIAL THICKNESS	0.375 INCHES NOMINAL
ABTB	MOUNTING HOLE DIAMETER	0.164 INCHES NOMINAL
ACHY	MOUNTING HOLE TYPE	COUNTERBORED
ADLK	FIRST LEG LENGTH	2.125 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	2.680 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	AIR COMBAT MANEUVERING INSTRUMENTATION (ACMI); P4RC
AHLF	SECOND LEG WIDTH	2.680 INCHES NOMINAL
AHLH	SECOND LEG END WIDTH	0.250 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.164 INCHES NOMINAL
AHLN	SECOND LEG HOLE DIAMETER	0.164 INCHES NOMINAL
AHLT	SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH	0.180 INCHES NOMINAL
AHLU	SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH	0.500 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	1.000 INCHES NOMINAL
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.188 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	2.125 INCHES NOMINAL
AHQQ	FIRST LEG END WIDTH	0.250 INCHES NOMINAL
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	1.343 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.532 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.188 INCHES NOMINAL
AJZU	FIRST LEG STYLE	ANGLE
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
AKBU	SECOND LEG STYLE	ANGLE
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	THREE HOLES
ASXK	HOLE QUANTITY	5
CRMK	ANGLE	90.0 DEGREES NOMINAL
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	GUSSET
FEAT	SPECIAL FEATURES	MOUNTING HOLES ARE 0.164-32UNC-2B COUNTERBORED 0.250
MATT	MATERIAL	ALUMINUM ALLOY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	TRIANGLE
ZZZK	SPECIFICATION/STANDARD DATA	81348-QQ-A-250/11 GOVERNMENT SPECIFICATION
ZZZT	NONDEFINITIVE SPEC/STD DATA	6061 ALLOY AND 651 TREATMENT