Buy Mil Spares is your sourcing solution for top-quality military and defense parts, aerospace parts, and other similar products that are necessary for operational fulfillment. You have reached the RFQ page for part number 5H284, a Worm Shaft item that is listed with the NSN 3040-00-712-7699 for an ease of identification. Manufactured by Caterpillar Inc and readily available for procurement today, you are always welcome to request a quote on this NSN part to receive tailored pricing information and fulfillment options from our team. Simply offer us important information like your desired quantity, price, and fulfillment timeframe, and our team will supply you with a tailored quote on part number 5H284 in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers quickly identify and procure exact items, we list everything with as much relevant information as possible. For example, while part number 5H284 is manufactured by Caterpillar Inc, it is specifically done so under CAGE Code 11083, a unique identifier assigned to a specific facility by the DLA that supplies to various government or defense agencies. Furthermore, using the first digits of the NSN 3040-00-712-7699, one can also determine that this part falls under FSC 3040 Miscellaneous Power Transmission Equipment. With this in mind, continue exploring our website today, and see how we can help you secure competitive pricing and rapid lead times on all desired NSN parts.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-712-7699 Item PartTypeName: WORM SHAFT | 3040 | 007127699 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5H284 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | 0.625 INCHES NOMINAL SECOND END,FOURTH PORTION |
| ABHP | OVERALL LENGTH | 12.250 INCHES NOMINAL |
| ABND | TAPER LENGTH | 1.469 INCHES NOMINAL SECOND END,THIRD PORTION |
| ABNJ | TAPER PER FOOT IN INCHES | 1.500 SECOND END,SECOND PORTION |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SECOND END,FOURTH PORTION |
| BYFR | TEETH HARDNESS RATING | 55.0 ROCKWELL C MINIMUM |
| CFFB | WORM THREAD QUANTITY | 4 |
| CFFC | WORM THREAD LEAD | 2.846 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFG | WORM HELIX ANGLE | 28 DEG |
| CFFK | WORM OUTSIDE DIAMETER | 2.250 INCHES NOMINAL |
| CFFL | WORM PITCH DIAMETER | 0.688 INCHES NOMINAL |
| CFFN | WORM THREAD SECTION LENGTH | 2.750 INCHES NOMINAL |
| CFFP | WORM BODY LENGTH | 4.312 INCHES NOMINAL |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.876 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.906 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.250 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.998 INCHES MINIMUM SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.000 INCHES MAXIMUM SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1265 INCHES MINIMUM FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1265 INCHES MINIMUM SECOND END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1270 INCHES MAXIMUM FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1270 INCHES MAXIMUM SECOND END,FIRST PORTION |
| CFGD | TAPER LARGEST DIAMETER | 1.188 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFGG | TAPERED SECTION KEYWAY WIDTH | 0.2487 INCHES MINIMUM SECOND END,SECOND PORTION |
| CFGG | TAPERED SECTION KEYWAY WIDTH | 0.2505 INCHES MAXIMUM SECOND END,SECOND PORTION |
| CFGH | TAPERED SECTION KEYWAY DEPTH | 0.307 INCHES MINIMUM SECOND END,SECOND PORTION |
| CFGH | TAPERED SECTION KEYWAY DEPTH | 0.313 INCHES MAXIMUM SECOND END,SECOND PORTION |
| CFGJ | INVOLUTE SPLINE QUANTITY | 11 FIRST END,SECOND PORTION |
| CFGK | INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 30.0 FIRST END,SECOND PORTION |
| CFGL | INVOLUTE SPLINE PITCH DIAMETER | 0.6875 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFGM | INVOLUTE SPLINE LENGTH | 1.031 INCHES NOMINAL FIRST END,SECOND PORTION |
| MATT | MATERIAL | STEEL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
